EN | AR | AZ | | ورود

اعضا - مهدی اسکندرزاده اصل

:: فهرست بخش ها ::
:: ::
:: دکتر مهدی اسکندرزاده اصل | برگشت به صفحه کارنامه علمی | [نسخه ویژه چاپ] ::
مقالات چاپ شده
  1. M. Eskandarzade, R. Hildyard, S. R. Bewsher, K. Osouli-Bostanabad, A. Tutunchi, M. Mohammadpour, Tribological Properties of Bulk Nanostructured Samples for Automotive Bearing Application, Materials Today Communications, Under Revision, 2022.
  2. Mehdi Eskandarzade, Reza Shahrivar, R. M. Chandima Ratnayake, Umair Niaz Bukhari, An Optimal Approach for Semi-Quantitative Risk-Based Inspection of Pipelines, Journal of Pipeline Systems Engineering and Practice, Volume 13 Issue 3 - August 2022, https://doi.org/10.1061/(ASCE)PS.1949-1204.0000653
  3. Abolfazl Tutunchi, Mehdi Eskandarzade, Karim Osouli, Risk assessment of electrofusion joints in commissioning of polyethylene natural gas networks, International Journal of Pressure Vessels and Piping, 2022, https://doi.org/10.1016/j.ijpvp.2022.104627
  4. Meysam Najafi Ershadi, Mehdi Eskandarzade, Seyed Mohammad Arab, Chandima Ratnayake, Consequence Assessment of hazardous liquid Pipelines using Gray Relational Analysis, Journal of Pipeline Systems Engineering and Practice, under revision, 2022.
  5. Mehdi Eskandarzade, Milad Zeidi, Ali Kalaki, Potential use of hydrogen energy in steel making industry, ICREDG2022, Mashhad, Iran, Feb. 10-11, 2022.
  6. Milad Zeidi, Mehdi Eskandarzade, Techno-economic study of using hydrogen in steel making industries of Iran, 3th international conference on new technologies in oil, gas and petrochemical, 15-17 February, 2022.
  7. Rohan Jivan, Mehdi Eskandarzade, Stephen Bewsher, Michael Leighton, Mahdi Mohammadpour, Sina Saremi-Yarahmadi, “Application of Solid Lubricant for Enhanced Frictional Efficiency of Deep Drawing Process”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236, no. 1 (2022): 624-634
  8. Keith Walton, Mehdi Eskandarzade, “Shutdown & Turnaround (TAR) optimisation-the criteria for selecting equipment for Non-Intrusive inspection”, 4th international conference on Risk Based Inspection & Preventive Maintenance, Delhi, India, 9 April, 2021.
  9. Mehdi Eskandarzade, Meysam Najafi, experimental and numerical investigation of the frictional forces in equal channel angular pressing, uludağ university journal of the faculty of engineering, Vol. 26, No. 1, 2021. DOI: 10.17482/uumfd.818759
  10. Masalehdan, T., Eskandarzade, M., Tutunchi, A., Kim, B., Questa, H., Mohammadpour, M. and Asl, M.S. Two-dimensional clay nanosheet-reinforced polytetrafluoroethylene composites and their mechanical/tribological studies, Materials Today Communications, 26, p.102026, 2021.
  11. Kalaki, A., Eskandarzade, M., Minaei, A. and Ratnayake, R.C., Effect of Secondary Cooling Rate in Corrosion Performance of Line Pipe Material in Sour Service Applications. Journal of Pipeline Systems Engineering and Practice, 12(2), p.06021001, 2021.
  12. Shabnam Majdi Taghi dizaj, Meysam Najafi Ershadi, Ali Kalaki, Mehdi Eskandarzade, Hadi Ghaebi, Techno-economic study of the necessity of helium extraction from natural gas in Iran, 2th international conference on new technologies in oil, gas and petrochemical, 23-24 February, 2021.
  13. Oghli, H.M., Akhbari, M., Kalaki, A. and Eskandarzade, M., Design and Analysis of the Cathodic Protection System of Oil and Gas Pipelines, Using Distributed Equivalent Circuit Model. Journal of Natural Gas Science and Engineering, p.103701, (84) online available, 2020.
  14. Mehdi Eskandarzade, R.M. Chandima Ratnayake, Meysam Najafi Ershadi, Mechanization of Qualitative Risk Based Inspection Analysis”, International Conference on Industrial Engineering and Engineering Management (IEEM2020), Singapore, 14-17 December 2020.
  15. M. Eskandarzade, A. Tutunchi, K. Osouli-Bostanabad, “Risk Assessment of the Urban Natural Gas Polyethylene Piping System” ASCE's Journal of Pipeline Systems - Engineering and Practice, 11, no. 2 (2020): 06019005.
  16. Meysam Najafi Ershadi, Mehdi Eskandarzade, Ali Kalaki, “Risk Based Inspection of Composite Components in Oil and Gas Industry”, Journal of Gas Technology, 6, 2020. http://jgt.irangi.org/Article/13980221179247
  17. M. Eskandarzade, A. Tutunchi, A. Kalaki, “Fitness for Service (FFS) evaluation of the high-pressure pipelines containing local metal loss defects” Journal of Mechanical Engineering, 50(2), 2019. https://tumechj.tabrizu.ac.ir/article_9609_en.html
  18. Eskandarzade, M., Faraji, G., Masoumi, A. and Kalaki, A., 2019. Optimal Design of Steppers in Single Step High Pressure Torsion (SIHPT) Process as a Novel SPD Method. ADMT Journal, 12(1), pp.41-50.
  19. Ali Kalaki, Mehdi Eskandarzade, Saeed Barghani, Mahdi Mohammadpour, Experimental and numerical evaluation of influencing parameters on the manufacturing of lined pipes, International Journal of Pressure Vessels and Piping, Volume 169, 2019. https://doi.org/10.1016/j.ijpvp.2018.11.014.
  20. Mehdi Eskandarzade, Ali Kalaki, Majid Safajou Jahankhanemlou,  Meysam Najafi Ershadi, “Material Selection Strategy for Corrosion Control in Iranian Upstream Oil and Gas Industry” International Conference on New Technologies in Oil, Gas and Petrochemical Industries, University of Tehran, 2019.
  21. Karim Osouli, Abolfazl Tutunchi, Mehdi Eskandarzade, Graphene Nanosheets Reinforced Epoxy Nanocomposites; Mechanical and Electrical Properties Evaluation, Polymer Science Series A, 2019, 0(6):851–861, DOI: 10.1134/S0965545X18070064.
  22. K. Osouli-Bostanabad, A. Tutunchi, M. Eskandarzade, A. Kianvash “Numerical and Experimental Investigation on Boding Strength Optimization of Glass Fibers Reinforced Epoxy Composites on a Structural Steel Substrate”, Modares Mechanical Engineering, 19(2): 2019; 387-396.
  23. Mehdi Eskandarzade, Ali Kalaki, Reza Shahrivar, The Application and Limitations of Corrosion Management Process, Structural Integrity and Life, Vol. 18, No 3 (2018), pp. 159 – 162. http://divk.inovacionicentar.rs/ivk/ivk18/ivk1803-1.html 
  24. K. Osouli-Bostanabad, A. Tutunchi, M. Eskandarzade. “The influence of pre-bond surface treatment over the reliability of steel epoxy/glass composites bonded joints” International Journal of Adhesion and Adhesives 75: 2017; 145–154.
  25. Eskandarzade, Mehdi, Abolfazl Masoumi, Ghader Faraji, Mahdi Mohammadpour, and Xinjie Sabrina Yan. "A new designed incremental high-pressure torsion process for producing long nanostructured rod samples." Journal of Alloys and Compounds 695 (2017): 1539-1546.
  26. Eskandarzade, Mehdi, Abolfazl Masoumi, and Ghader Faraji. "Numerical and analytical investigation of an ultrasonic assisted ECAP process." Journal of Theoretical and Applied Vibration and Acoustics 2, no. 2 (2016): 167-184.
  27. Mollazadeh, H., R. Noruzi, and M. Eskandarzade. "A Study of Fatigue Properties of Steel AISI4130 (30KhMF) After Upset Welding." Metal Science and Heat Treatment 57, no. 1-2 (2015): 52-56.
  28. Eskandarzade, M., Tribikram Kundu, N. Liebeaux, D. Placko, and F. Mobadersani. "Numerical simulation of electromagnetic acoustic transducers using distributed point source method." Ultrasonics 50, no. 6 (2010): 583-591.
:: ::