Equipment Specifications	Capacity	Model and Year of Manufacture	Manufacturer Company and Country	Test Standard	Device Status - Quantity
Extraction	1500gr	AS 100-2005	Azmoonsaz Mabna - Iran	ASTM D2172	Sound - 1

General Specifications:
This device is used for extracting bitumen from asphalt and determining the bitumen content. A sample of up to 1500 grams is placed in the bowl, and by adding solvent and rotating the bowl using a lever, the bitumen can be separated from the asphalt, leaving only the aggregate materials. The device includes an aluminum bowl and lid with a capacity of 1500 grams, mounted on an aluminum base. The suitable filter for this device has an outer diameter of 250 mm.

Equipment Specifications	Capacity	Model and Year of Manufacture	Manufacturer Company and Country	Test Standard	Device Status - Quantity
Marshall Compaction Hammer	4530gr	432-2007	ELE - UK	ASTM D1559	Sound - 1

General Specifications:
Used for compacting Marshall test specimens. The device consists of a wooden base, a compaction hammer, a corrosion-resistant plate, a guide rod, a mold holder (clamp), and a mold.

Automatic Marshall Compaction Hammer

Equipment Specifications	Capacity	Model and Year of Manufacture	Manufacturer Company and Country	Test Standard	Device Status - Quantity
Marshall Compaction Hammer	4530gr	AS 1161-2007	Azmoonsaz Mabna - Iran	ASTM D1559	Sound - 1

General Specifications:
The compaction process is fully automatic. The device begins compacting the specimen based on a programmable digital counter and stops automatically after the final blow. The hammer weighs 10 lb (4.53 kg) and has a drop height of 18 inches (457 mm).

Marshall Jack

Equipment Specifications	Capacity	Model and Year of Manufacture	Manufacturer Company and Country	Test Standard	Device Status - Quantity
Marshall Jack	4000kg	AS 180-2007	Azmoonsaz Mabna - Iran	ASTM D1559	Sound - 1

General Specifications:
The Marshall jack is used to determine the compressive strength of asphalt specimens.

 

Equipment Specifications	Capacity	Model and Year of Manufacture	Manufacturer Company and Country	Test Standard	Device Status - Quantity
Asphalt Bath	30 Lit	AS240-2007	Azmoonsaz Mabna - Iran	ASTM D1559	Sound - 1

General Specifications:
Used to maintain Marshall specimens at a constant temperature of 60 ± 1ºC.

Equipment Specifications	Capacity	Model and Year of Manufacture	Manufacturer Company and Country	Test Standard	Device Status - Quantity
Bitumen Standard Needle Penetration Apparatus	50mm	S0480 – 123 , 2005	Azmoonsaz Mabna - Iran	ASTM D5	Sound - 1

General Specifications:
Used to determine the penetration depth of a standard needle into a bitumen sample under a specified load and controlled temperature.

Softening Point Apparatus for Bitumen

Equipment Specifications	Capacity	Model and Year of Manufacture	Manufacturer Company and Country	Test Standard	Device Status - Quantity
Bitumen Softening Point Apparatus	-	BI 130 -2007	Azmoonsaz Mabna - Iran	ASTM D36	Sound - 1

General Specifications:
The softening point of bitumen, among other factors, depends on temperature variations—softening increases as temperature rises. This simple apparatus, designed to determine this property, includes:

• A temperature-adjustable heating unit
• An 800 ml Pyrex beaker with a magnetic stirrer
• Two brass rings (molds)
• Two guide supports
• One steel ball

This setup is typically used in the Ring and Ball method to determine the softening point of bitumen.
 

Equipment Specifications	Capacity	Model and Year of Manufacture	Manufacturer Company and Country	Test Standard	Device Status - Quantity
Digital Cement Mortar Flexural and Tensile Strength Determining Apparatus	30kN	CE -2006	Azmoonsaz Mabna - Iran	ASTM C307-348	Sound - 1

General Specifications:
This device is capable of applying flexural load on specimens sized 40×40×160 mm and tensile load on briquette-shaped samples. The loading rate can be preset, and the maximum flexural or tensile force is measured by a digital display with 1 kg precision.

Equipment Specifications	Capacity	Model and Year of Manufacture	Manufacturer Company and Country	Test Standard	Device Status - Quantity
Gradation Shaker	8-12 inch diameter	So 410	Azmoonsaz Mabna- Iran	ASTM-D422	Sound - 1

General Specifications:
The device operates with both vertical and horizontal motion powered by a vibration motor, ensuring optimal sieving results for aggregates and sand.

To facilitate the sieving process, an electric-powered Sieve Shaker is used. It features:

• A frame designed to hold 8-inch or 12-inch sieves
• A horizontal clamping lever to secure the sieves
• A nearly circular base plate with concentric grooves sized for 8 and 12-inch sieves, ensuring centered placement within the frame

This configuration enhances efficiency and accuracy in particle size analysis.

Automatic Electric Sand Equivalent Shaker

Equipment Specifications	Capacity	Model and Year of Manufacture	Manufacturer Company and Country	Test Standard	Device Status - Quantity
Automatic Sand Equivalent Electric Shaker	-	So 560-2008	Azmoonsaz Mabna- Iran	ASTM D2419	Sound - 1

General Specifications:
The purpose of this test is to determine the ratio of sand volume to the total soil volume, effectively assessing the cleanliness of the sand.

This automatic shaker performs horizontal oscillations with a stroke length of 20 cm, executing 90 back-and-forth movements within 60 seconds, ensuring consistent and standardized agitation for accurate sand equivalent measurements.

Application Type	Minimum Acceptable SE (%)
General Construction	> 70
Concrete Aggregate	> 50
Asphalt Concrete	> 30
Base Layer	> 25
Subbase Layer	> 40
Drainage Layer	> 40

Equipment Specifications	Capacity	Model and Year of Manufacture	Manufacturer Company and Country	Test Standard	Device Status - Quantity
250 kN Mortar Breaker Jack with Digital Reading Device	250KN	C 050-2010	Tecnotest-Italy	ASTM C 109	Sound - 1

General Specifications:
This machine applies compressive load on cube specimens sized 40×40 mm and 50×50 mm, and flexural load on prism specimens sized 40×40×160 mm. The loading rate can be preset, allowing precise control during testing. It is capable of measuring and displaying both compressive and flexural strength of various mortar samples with high accuracy.